Fujitsu ARXG22KMLB Design & Technical Manual page 170

• When function setting is "Forced stop" mode
– In the case of "Edge" input:
Function
setting /
46-02
– In the case of "Pulse" input:
Function
setting /
46-02
CN313
CN314
Indoorunit
Remote controller
NOTES:
• When the forced stop is triggered, indoor unit stops and Operation/Stop operation by the re-
mote controller is restricted.
• When forced stop function is used with forming a remote controller group, connect the same
equipment to each indoor unit within the group.
11-2. Wall mounted type (KGTB, 18-24KMTB, KETA, and KETA-B)
Rotary SW on
External input and
output PCB
60-00 / 1
On
CN313
Off
Forced stop
Normal
Operation
Indoor unit
Stop
Remote controller
Rotary SW on
External input and
output PCB
60-00 / 1
On
Off
On
Off
Forced stop
Normal
Operation
Stop
External input
External input and
CN313
output PCB
On
External input
CN313
External input and
output PCB
CN314
On
- 162 -
Input signal Command
Off → On Forced stop
On → Off Normal
On On
Input signal Command
Pulse Forced stop
Pulse Normal
On On
11. External input and output