Table of Contents
Advertisement
13.
VGA connector (16-pin VGA_HDR1)
This connector supports the VGA High Dynamic-Range interface.
14.
Chassis Intrusion (2-pin INTRUSION1)
These leads are for the intrusion detection feature for chassis with intrusion sensor or
microswitch. When you remove any chassis component, the sensor triggers and sends
a high level signal to these leads to record a chassis intrusion event. The default setting
is to short the CHASSIS# and the GND pin by a jumper cap to disable the function.
ASUS RS720A-E9-RS24-E
4-19
Advertisement
Table of Contents
