Table of Contents
Advertisement
Add a Network Interface Card
Your DiskStation has a PCI Express expansion slot which allows you to install 10GbE or Gigabit network interface
card for LAN port expansion.
1
To install a network interface card:
1 Press and hold the power button until you hear a beep sound to shut down your DiskStation. Disconnect all
cables from your DiskStation to prevent any possible damage.
2 Remove the 6 screws that secure the main unit, and then pull the top cover in the direction as illustrated below.
1
For more information about supported 10GbE or Gigabit network interface cards, please visit www.synology.com.
13 Chapter 2: Hardware Setup
Advertisement
Table of Contents
