Ocean Matrix OMX-01KVKV0001 Installation & Specifications

TRANSMITTER
1
5
4 6
1 DVI Input Connector
2 USB Cable Input
3 Remote Power On Pins
4 IR TX Port
5 Status Indicator LED
6 Power Indicator LED
7 UTP Cable Port Output
8 5VDC Power Supply Input
Connection
1. Connect the DVI source to the DVI transmitter.
2. Connect Cat5e/6 cables to the UTP output port of the transmitter and the UTP port of the receiver
3. Connect the receiver to the monitor, keyboard, mouse
4. Connect the included power supplies to the transmitter and to the receiver.
Power On Button
Note: When the
Specifications
Transmission Distance up to 1080p@60 Hz up to 164 feet over Cat 5e/6
IR Bandwidth 38kHz – 56kHz
Dimensions Each Unit 4 x 3 5/16 x 1 1/8 Inches
Weight Each Unit 5.8 oz / RX 5.9 oz
1- Transmitter, 1-Receiver, (2)-5VDC/1A Power Supplies, IR-TX
Includes
Cable, IR-RX Cable, DVI + USB Cable
INSTALLATION & SPECIFICATIONS
OMX-01KVKV0001
1080p/60 DVI KVM Extender Kit
2 3
7 8
on the Receiver is pressed, the transmitter's power will also turn on.
812 Kings Highway • Saugerties, NY 12477
www.oceanmatrix.com
1 DVI Output Connector
2 Keyboard/Mouse USB Inputs
3 Power On Button
4 IR RX Port
5 Status Indicator LED
6 Power Indicator LED
7 UTP Cable Port Input
8 5VDC Power Supply Input
Ocean Matrix
RECEIVER
1 2
5
3 4 6 7 8
Rev1a