Table of Contents
Advertisement
Profiles
(M 7)
Profiles
(M 7-1)
Tone sound and vibration set can be customised for
each profile according to your environment.
There are 6 profiles including one user definable
profile: Normal, Meeting, Activity, Car, Headset and
Silent.
Activating a Profile
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding icon
described on page 16 is displayed on the stand-by
screen.
Normal:
This is the default setup (not
displayed in the stand-by screen).
Meeting:
For use when discretion needed.
Activity:
For use in busy environments.
Car:
For use in the car (connected to a
handsfree car kit).
Headset:
For use with a headset (connected
via Bluetooth).
Silent:
For use when silence is needed. All
sounds are muted and you are
alerted to calls with the vibrator.
Tip
• Long press R to enter Profiles settings.
Customising Profiles
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select the setting you wish to customise and change
as desired.
For details about settings, see pages 90 to 94.
4.
Press [Save] when finished.
Resetting Profile Settings
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "0000". For details on
changing the handset code, see "To Change Handset
Code" on page 113.
4.
Press [OK], and select [Yes].
Profiles
89
Advertisement
Table of Contents
