Supermicro AS-4124GS-TNR User Manual page 91

•
Vendor Keys
•
Sucre Boot
Secure Boot
Select Enabled to use Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CMS Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Disabled and Enabled.
 Key Management
Provision Factory Defaults
The options are Disabled and Enabled.
 Restore Factory Keys
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No.
 Reset to Setup Mode
Select Yes to reset the system to the Setup Mode. The options are Yes and No.
 Export Secure Boot Variables
This feature is used to copy the NVRAM content of Secure Boot variables to a storage device.
 Enroll EFI Image
Select this feature and press <Enter> to specify an EFI (Extensible Firmware Interface) image
for the system to use when it operates in the Secure Boot mode.
Device Guard Ready
 Remove 'UEFI CA' from DB
Select Yes to remove UEFI CA from the database. The options are Yes and No.
91
Chapter 6: UEFI BIOS