Supermicro AS-4124GS-TNR User Manual page 89

Chapter 6: UEFI BIOS
Erasing Settings
Erase Event Log
Select No to keep the event log without erasing it upon next system bootup. Select Yes, Next
Reset to erase the event log upon next system reboot. The options are No, Yes, Next Reset,
and Yes, Every Reset.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the
event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log
is full. The options are Do Nothing and Erase Immediately.
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Enabled and Disabled.
MECI (Multiple Event Count Increment)
Enter the increment value for the multiple event counter. Enter a number between 1 to 255.
The default setting is 1.
METW (Multiple Event Count Time Window)
This feature is used to determine how long (in minutes) should the multiple event counter wait
before generating a new event log. Enter a number between 0 to 99. The default setting is 60.
View System Event Log
This feature allows the user to view the event in the system event log. Select this item and
press <Enter> to view the status of an event in the log. The following categories are displayed:
Date/Time/Error Code/Severity
89