StarTech.com 2SD4FCRU3C Quick Start Manual

Quick-start guide
Dual-Slot SD Card Reader - USB 3.0 with USB-C - SD 4.0, UHS II
2SD4FCRU3C
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
Important: Read and understand the entire manual
before you use this product, and follow the instructions
as they are outlined in the manual.
Failure to do so could result in property damage or device
failure.
Introduction
You can use the 2SD4FCRU3C to simultaneously access one or two
SD, SDHC™ (Secure Digital High Capacity), or SDXC™ (Secure Digital
Extended Capacity) cards, and leverage read and write functionality
for files such as documents, spreadsheets, slide shows, images,
videos, and music. The 2SD4FCRU3C delivers USB 3.0 performance,
which provides transfer speeds up to 5Gbps. The 2SD4FCRU3C
also features an integrated USB-C™ cable for added protection and
increased portability.
Product diagram
USB-C connector
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/2SD4FCRU3C.
Packaging contents
• 1 x dual-slot SD™ card reader
• 1 x quick-start guide
System requirements
This converter is OS independent and doesn't require any additional
drivers or software.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/2SDFCRU3C.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
offers speeds up to 5Gbps.
Use the SD card reader
To access the data stored on your SD card or cards, complete the
following:
1. Hold the SD card so that the label is facing up and insert your SD
2. If necessary, insert a second SD card into Slot 2 on the
3. Connect the integrated USB-C connector on the 2SD4FCRU3C to
4. Access the data that's stored on the SD card or cards.
Slot 2
Connect an auxiliary power source
Slot 1
If you require additional power when you use the 2SD4FCRU3C,
connect the USB cable on your power source to the AUX Micro-B
power port on the 2SD4FCRU3C.
*actual product may vary from photos
AUX Micro-B
power port
card into Slot 1 on the 2SD4FCRU3C.
2SD4FCRU3C.
the USB port on your host device.
Manual Revision: 07/05/2016