StarTech.com CFASTRWU3 Quick Start Manual

Quick-start guide
USB 3.0 Card Reader / Writer for CFast 2.0 Cards
CFASTRWU3
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
Introduction
The CFASTRWU3 USB 3.0 Card Reader/Writer enables you to quickly
access and back up photos and videos from your CFast™ memory
cards to your tablet, laptop, or desktop computer.
Product diagram
CFast port
Activity LED
Package contents
• 1 x USB 3.0 card reader/writer
• 1 x quick-start guide
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
offers speeds up to 5Gbps. Any mention of USB 3.0 in this manual
or on the StarTech.com website for CFASTRWU3 refers to the 5Gbps
USB 3.1 Gen 1 standard.
Note: Data transfer rates are dependent upon the speed of the
memory card that you are using and the speed capabilities of the
USB port on your host device.
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/CFASTRWU3.
USB 3.0 plug
*actual product may vary from photos
Requirements
• A tablet, laptop, or desktop computer with a USB Type-A port
• A CFast memory card
Note: To obtain the maximum USB throughput, you must use a
system with a USB 3.0 port.
The CFASTRWU3 is OS independent and doesn't require any
additional drivers or software.
Requirements are subject to change. For the latest requirements,
please visit www.StarTech.com/CFASTRWU3.
Connect the card reader/writer
1. Connect the USB 3.0 plug on the card reader/writer to a USB port
on your tablet, laptop, or desktop computer.
2. Insert a CFast memory card into the CFast port on the card
reader/writer.
3. To access content on the CFast memory card, follow the
instructions specific to the OS that you're running.
When you connect the card reader/writer to your tablet, laptop, or
desktop computer, your system automatically detects and installs
the required software.
Note: The CFASTRWU3 doesn't require an external power supply, as
it receives enough power through the USB bus that it's connected to.
Disconnect the card reader/writer
Windows
1. On your desktop, click the Safely Remove Hardware icon.
2. In the list that appears, click the card reader/writer.
3. When a message appears saying that it's safe to do so, remove the
card reader/writer from your laptop, or computer.
Caution! If you remove the card reader/writer before it's safe to do
so, you could experience lost or corrupted data on your memory
card.
macOS
1. Close any open windows that list the contents of the card
reader/writer.
2. On your desktop, click and drag the USB storage icon to the trash
can icon.
3. Wait ten seconds and then remove the card reader/writer.
Caution! If you remove the card reader/writer before it is safe to do
so, you could experience lost or corrupted data on your memory
card.
Manual Revision: 01/20/2017