StarTech.com FCREADHCU3 Instruction Manual

Instruction Manual
External USB 3.0 Flash Memory Card Reader
FCREADHCU3
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x USB 3.0 Card Reader
• 1 x USB 3.0 Cable
• 1 x Instruction Manual

System Requirements

• USB enabled computer system with available USB port
• Microsoft® Windows® XP/ Server 2003/ Vista/ Server 2008 R2/ 7
(32/64-bit)
Installation
1. While the computer is running, connect the USB cable from the
back of the card reader, to an available USB port on the host
computer. The LED on the top of the card reader will light up.
2. Windows will automatically detect the card reader and install the
drivers.
3. Once the drivers are installed, the card reader will be ready for
use.
4. Gently insert a memory card into the appropriate card slot, with
the label side facing up. The card should not have to be forced.
5. Access the memory card like any other removable storage device,
from the "My Computer" window.
6. To remove the memory card, make sure it is not currently being
accessed, and simply pull the card the card from the slot.
For the most up-to-date information, please visit: www.startech.com

Front View

1
Rear View
USB 3.0 Connector (host)
Card Slot 1
CompactFlash® type I/II
Memory Stick® (MS), MS Duo, MS PRO,
Card Slot 2
MS Select, MS PRO Duo, MS-ROM, MSXC
*MagicGate™ and High Speed modes supported
Card Slot 3 MicroSD, MicroSDHC, Memory Stick Micro (M2)
Secure Digital® (SD), SDHC, SDXC,
Card Slot 4
MultiMediaCard™ (MMC), DV-MMC, RS-MMC,
DV-RS MMC, MMCplus, MMCmobile
2
3
*actual product may vary from photos
4
Manual Revision: 10/06/2014