Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing a Busker-10U portable PA unit. This versatile portable PA unit is packed with features in a compact, manageable enclosure and is suitable for a wide array of applications ranging from public address for presentations to outdoor karaoke.
Page 3
Line input stereo 3.5mm jack UHF microphone antenna Line input L+R RCA Line output L+R RCA Microphone 2 input jack Microphone 1 input jack Guitar input volume Guitar input jack IEC mains inlet & fuse Microphone talk-over select Power on/off switch Busker-10U User Manual...
Page 4
Powering up Your new Busker-10U portable PA unit may arrive with you with the internal battery charged. Before connecting to the mains, turn down all volume controls and switch the unit on (32) and check to see if the power LED above the switch is lit. If not, you will need to charge the battery before use away from mains power.
External Inputs In addition to the Busker-10U’s own UHF microphone, two 6.3mm jack inputs (26, 27) are provided to connect external wired or wireless microphones, which are both governed by the WIRED MIC VOL control (19). If required, the music level can be automatically muted when speaking into a microphone by switching in the TALKOVER feature on (31) A further 6.3mm jack input is provided for an electric or electro-acoustic guitar (29)
Once audio is playing through the Busker-10U from Bluetooth, adjust the MEDIA volume control (7) to the required volume. Bluetooth on the Busker-10U can only pair to a single device at any one time and should be operable over a range of 5 to 8 metres.
Bluetooth version Output power Frequency response 50Hz - 18kHz SPL @ 1W/1m 92dB Main driver 250mmØ (10“) Impedance: loudspeaker 4 Ohms HF driver: type Compression driver Wireless mic frequency 863.8MHz Dimensions 525 x 330 x 290mm Weight 9.45kg Busker-10U User Manual...