QR10PA portable PA unit Thank you for choosing the QR10PA portable PA unit. Please read this manual prior to use to avoid damage to the item. This versatile portable PA unit is packed with features in a compact, manageable enclosure and is suitable for a wide array of applications ranging from public address for presentations to outdoor karaoke.
Connection Your new QR10PA portable PA unit may arrive with you with the internal battery charged. Before connecting the 12Vdc adaptor to the mains, switch the unit on and see if the power LED lights. If not, you will need to charge the battery before using away from a mains supply (see “Charging the battery”...
VHF Neckband Microphone Connect the neckband microphone to the bodypack via the 3.5mm jack, slide open the bodypack and insert the supplied 9V battery, observing the correct polarity. With the wireless receiver VOL control turned down, press the VHF ON/OFF button in so that the VHF POWER LED lights. Switch on the beltpack transmitter fully (2 clicks as the centre position is “MUTE”) –...
Page 6
Media Player Menus FM Tuner Menu Pressing MODE in FM Tuner mode opens the FM Tuner Menu Use VOL- and VOL+ buttons to navigate through the menu and Play/Pause button to select Auto search activates a search through FM frequencies and auto-stores detected stations Manual replay Manual Station Search: Use VOL- and VOL+ buttons to scan manually in steps Semi-automatic Station Search: Use VOL- and VOL+ buttons to auto-scan to next station...
Make sure volume is turned up on beltpack transmitter Power LED lit but no VHF output Check VHF POWER is switched on Check MIC VOLUME is not turned down on QR10PA Check RF LED is lit (otherwise check transmitter frequency)) Music level off or keeps cutting out Check that VCV is not switched on (will mute upon mic.