Cleaning Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. To avoid damage, do not use solvents to clean this equipment. SPECIFICATIONS QR12PA QR15PA Power supply 220-240Vac 50/60Hz / external 12Vdc / internal battery Main driver 30cm (12”)
Page 3
USB input SD card slot 2-band EQ controls (BASS + TREBLE) Music volume control 6.3mm jack microphone inputs Radio Frequency indicators (VHF carriers) Wireless microphone volume controls External 12Vdc power input Charging indicator 10) Mains power indicator 11) Media player LCD display 12) Media player mode/transport controls 13) Microphone Echo level control 14) Microphone inputs volume control...
Page 4
VHF Wireless Microphones Insert the supplied 9V batteries into the handheld microphones by carefully unscrewing the base of each and connecting the “+” and “-“ terminals or the battery to the corresponding clips inside the microphone body, taking care to observe the correct polarity. Connect the twin aerials to the connectors at the rear and extend them fully at an angle.