Qtx PAV8-UHF User Manual

Qtx PAV8-UHF User Manual

Stereo portable pa set

Advertisement

PAV8-UHF
Stereo Portable PA Set
Order ref: 178.859UK
User Manual
VERSION 1.0

Advertisement

Table of Contents
loading

Summary of Contents for Qtx PAV8-UHF

  • Page 1 PAV8-UHF Stereo Portable PA Set Order ref: 178.859UK User Manual VERSION 1.0...
  • Page 2 Thank you for choosing the PAV8-UHF stereo portable PA, which has been designed to provide a complete wire-free sound solution for a wide range of applications. Please read this manual fully to understand the various features on the PAV8-UHF and get the best results from this product.
  • Page 3: Main Unit Rear Panel

    Setting up The PAV8-UHF set is based around a main portable PA unit and a satellite speaker. Each can be free standing or mounted onto 35mmØ speaker poles. Open the rear panel on the satellite unit by removing the 4 thumb screws and use the speaker jack lead inside to connect the 6.3mm...
  • Page 4 Charging the battery and powering up Your new PAV8-UHF main unit may arrive with you with the internal battery charged. Before connecting to the mains, switch the unit on and see if the power LED (24) lights green and check the adjacent battery charge status LEDs. If the battery charge LED is red (low), you will need to charge the battery before using away from a mains supply.
  • Page 5: External Inputs

    External Inputs In addition to the PAV8-UHF’s own UHF microphones, two 6.3mm jack inputs (19, 20) are provided for connecting external wired or wireless microphones, which are both governed by the MIC VOL control (6). For guitarists, MIC 1 input can accept a guitar input instead of a mic.
  • Page 6: Media Player

    Media Player The PAV8-UHF has a built-in media player which has different options for media types. Disc Player Mode The media player can play audio CDs (including CD+G) and video DVDs. Insert a disc into the slot (3) and the mechanism will automatically feed the disc into the player.
  • Page 7: Bluetooth Receiver

    Your sending device should state that it is connected to “PA SYS” for audio output. Play audio on the sending device and check for output through the PAV8-UHF speakers. The PAV8-UHF Bluetooth receiver has duplex Play/Pause control over the sending device.
  • Page 8: Specifications

    Specifications Power supply 15Vdc @ 3A mains adaptor (supplied) Battery 12V, 4.5Ah Main driver 200mmØ (8“) main unit and satellite 4Ω Impedance (each) Amplifier output 50W main unit, 50W satellite Controls Mic Vol, Echo, Treble, Bass, Volume, UHF Vol, Contour, Bluetooth, VCV Battery life Up to 8 hours Inputs...

Table of Contents