•
Connect the faucet shank to inlet supply lines (Q). Connect the supply
stops (R) to the inlet supply lines (Q) (left is hot water supply and right
is cold water supply). Make sure inlet supply lines (Q) are securely
tighten. Do not
•
Turn on water. Check for any leaks. Make sure all the connections are
secure.
•
Remove aerator (S).
•
Open the handle.
•
Flush and allow water to run at full flow for at least one minute.
•
Replace aerator (S).
For more care information or trouble shooting inquiries about your
Pioneer Product, please see the contact information on the back page.
Main Supply Connection
overtighten.
7
REV-01 14, 13