Connecting With The Pc - LG L1760SR-BF User Manual

Connecting the Display

Connecting with the PC

1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect the signal cable
connection.
3.
Connect the power cable
then plug the cable in the outlet.
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
DC-IN
[ Connecting the cables]
4.
Touch the power button
The 'Self Image Setting Function' will automatically run
when the monitor is on.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'SET/AUTO' button on the front panel of the monitor. Otherwise, you may execute the ' Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
. When attached, tighten the thumbscrews to secure the
1
with the AC-DC adapter (AC-DC power supply)
3
D-SUB
in front to turn on the monitor.
DC-IN D-SUB
2
1
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
A5
, and
2
[ Arranging the cables]
3
Wall-outlet type
PC
PC-outlet type
PC
MAC