La Crosse Technology WS-2317 Operation Manual page 25

received. Now press the MIN/MAX key to toggle from the
minimum and maximum readings and the time and dates the
records were received are also shown. Still in the MIN/MAX
mode (where the time and date for a value are shown), press
the DISPLAY key to move through each respective unit as
follows:
• Indoor temperature (max or min with time and date)
• Indoor humidity (max or min with time and date)
• Outdoor temperature (max or min with time and date)
• Outdoor humidity (max or min with time and date)
• Outdoor wind chill (max or min with time and date)
• Outdoor dew point (max or min with time and date)
• Rainfall 24 hours (max or min with time and date)
• Rainfall 1 hour (max or min with time and date)
• Rainfall total (max only with time and date)
When in any of the above modes, press the MIN/MAX key to
toggle between the maximum or minimum values of those
records and their respective time and dates will also be
shown.
For the wind and pressure minimum and maximum readings,
the same would apply except that the WIND or PRESSURE
keys would be used instead of the DISPLAY KEY.
Exiting the MIN/MAX modes
If the maximum and minimum modes with times and dates are
displayed, press the PLUS (+) key twice to return the normal
display mode.
Resetting the MIN/MAX records
While in the minimum or maximum mode, the time and dates
are also displayed along with the recorded values. If the
MINUS (-) key is pressed while any of these values are
displayed, that particular minimum or maximum record will be
reset to current reading together with the current time and
date with the exception of the following:
The first case is Rainfall Total, which has neither
maximum nor minimum records since it will show only
the total rainfall. Pressing the MINUS (-) key will reset the
25