La Crosse Technology WS-3610U Operation Manual page 18

Example for Setting of Alarms by means of the HI Alarm
As in the example above, call up the corresponding menu in the
bottom section of the LCD by touching the PRESSURE field.
Proceed by touching ‫٭‬ALARM‫ ٭‬in the section at the bottom of
the LCD.
Proceed with ‫٭‬HI AL‫ ٭‬in the menu section.
Note: Setting of the low alarms is possible from here in
the same fashion by touching the ‫٭‬LO AL‫ ٭‬field.
Set the high alarm value with ‫٭‬UP‫ ٭‬or ‫٭‬DOWN‫.٭‬
Proceed with ‫٭‬ON/OFF‫.٭‬
Activate or deactivate the alarm with ‫٭‬ON‫ ٭‬or ‫٭‬OFF‫.٭‬
Return to normal display by touching ‫٭‬EXIT‫.٭‬
Note: Activation or deactivation of the alarm (Display or deletion
of the (((•))) symbol) only pertains to the presently
displayed value, in this example it is PRESSURE.
This completes the Example
18