Advertisement
Installation (cont.)
6. Once the shower panel has been tested for
functions and leaks. Hang the unit on the wall
to complete the installation. Due to the limited
space behind the shower panel, do not bend
the hoses. Any restrictions in the water supply
hoses will greatly reduce the performance of
the shower panel. After the shower panel is
set properly on the wall, apply silicon sealant
on both sides of the shower panel to prevent
the unit from moving.
(NOTE: Do not seal the bottom of the panel.)
7. Connect hand shower hose to the main
panel body and connect the hand shower
wand to the hose. Make sure the silicon
gaskets are seated properly to prevent water
leak.
Decor Star
9
PL-028-SS Rev. A2 092017
Advertisement
