Network - Kyocera ECOSYS P7240cdn Operation Manual

Setup and Registration (System Menu) > System Menu
Item
Job Name
Job Terminator

Network

Configures network settings.
Host Name
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [Host Name] > [OK] key
Item
Host Name
Wi-Fi Direct Set
[Menu] key > [▲] [▼] key > [Network] > [OK] key > [▲] [▼] key > [Wi-Fi Direct Set] > [OK] key
Set Wi-Fi Direct.
NOTE
This function is displayed when the optional Wireless Network Interface Kit is installed.
Item
Wi-Fi Direct
Device Name
IP Address
Set whether the job name set in the printer driver is displayed.
Value: Off, Job Name, Job No.+Job Name, Job Name+Job No.
You can select the condition which regarded as a job termination if the print job could not be
processed until the end due to your environment and the other reason.
Value
EOJ: Up to the detection of a command indicating the end of job data is regarded as one job.
End of Session: The data included in a network session at network connection is regarded as
one job.
UEL: The UEL included in the termination of the job data is regarded as one job until it is
detected.
Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-42)
Select whether to use Wi-Fi Direct.
Value: Off, On
Specify the device name.
NOTE
• Up to 32 characters can be entered.
• This function is displayed when [Wi-Fi Direct] is set to [On].
Check the IP address of the machine.
TCP/IP Settings (page 8-14)
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
8-12
Description
Description
Description