Pin Login Settings - Kyocera ECOSYS P7240cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

PIN Login Settings

NOTE
This setting is only displayed when [Network Authentication] must be selected for the authentication method and the
server type is set to [Ext.] in "Network Authentication".
Enabling User Login Administration (page 9-3)
1
2
Display the screen.
1
[Menu] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
[▲] [▼] key > [User Login Set.] > [OK] key
Configure the settings.
[▲] [▼] key > [PIN Login] > [OK] key > [▲] [▼] key > Select [Off] or [On] > [OK] key
ECOSYS P6235cdn
3500
3500
9-12
ECOSYS P7240cdn
4000
4000