How To Install The Projector Using A Tripod; Kensington Security System - LG HX350T Owner's Manual

How to install the projector using a tripod

* You can install this projector using a camera tripod.
* When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5 mm or less.The maximum size
allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.)
Part connected to the tripod
Bottom side of Projector

Kensington Security System

• This projector has a Kensington Security System Connector on the connect panel. Connect a Kensington Security
System cable as below.
• For detailed installation and use of the Kensington Security System, refer to the user's guide included with the
Kensington Security System set. And for further information, contact http://www.kensington.com, the internet homepage
of the Kensington company that deals with expensive electronic equipment such as notebook PCs or projectors.
• The Kensington Security System is an optional item.
Part connected to the projector
+
Camera Tripod
=
Projector is install on the tripod
Installation
13