Table of Contents
Advertisement
Menu Operation
Privacy Setting
This function is aiming at the protection of personal pri-
vacy, selecting a screen part black not to be displayed in
the screen. Up to 8 zones can be registered.
1.
Select [PRIVACY] option.
Use [LEFT] or [RIGHT] button to select a [ON] and
.
press [SET]. The PRIVACY SETUP menu appears.
.
Use [LEFT] or [RIGHT] button to select a mask (AREA1
to AREA8) on the [MASK NUMBER].
.
Use [LEFT] or [RIGHT] button to set up the ON or OFF
on the DISPLAY option.
Use [LEFT] or [RIGHT] button to set up the GRAY,
5.
WHITE or BLACK on the COLOR option.
6.
Use [UP] or [DOWN] to select an option then use
[LEFT] or [RIGHT] button to adjust the option.
•
HEIGHT: Enlarge or decrease the vertical size of
the mask.
•
WIDTH: Enlarge or decrease the horizontal size of
the mask.
•
MOVE Y: Moves vertical position of the mask.
•
MOVE X: Moves horizontal position of the mask.
Note:
The parts with the registered mask numbers from AREA1
to AREA have the same color. (So do the parts with the
numbers from AREA5 to AREA8). If you change the mask
color, the registered mask color will be changed automati-
cally with the same color for each of group (AREA1 to ,
AREA5 to 8).
Advertisement
Table of Contents
