Copying Disc And Track Titles - Teac Tascam MD-801MKII Owner's Manual

5.11.6Copying disc and track titles

When two MD-801 units are connected together
using the optional PW-1XMD serial cable, disc and
track titles can be copied from one unit (master) to
the other (slave), as described in 4.3.10, "Track title
copying together with audio", with the following pro-
cedure.
1
After pressing the EDIT key on the slave unit,
turn the DATA dial until the display shows:
T I T L E
2
Turn the SHUTTLE wheel clockwise.
If the master MD-801 is in stop mode, the
indicator will light in the display, and you
T I T L E
can copy the title for the whole disc.
If the master MD-801 is in play or play mode,
the indicator will light in the dis-
T R AC K T I T L E
play, and you can copy the title for the current
track.
?
D I S C
5 - Track and disc title entry
3
The display will change:
_
4
With both units in stop mode, press the CALL
key [10] on the slave unit.
The title currently displayed on the master unit
(in this case, the disc title) is copied to the slave
unit.
NOTE
Track titles can also be copied in this way, as
well as using the method described in 4.3.10,
"Track title copying together with audio", as
long as the master unit is in play or play ready
mode.
TASCAM MD-801R/P Mk II
5–9