Recording The Next Track - Teac Tascam Porta-02MKII Ministudio Owner's Manual

3 Making your first recording
3.5

Recording the next track

16
Since you plugged the microphone into
didn't plug anything into
as if it was plugged into both channels.
1) Take fader 1 to the 0 mark.
2) Set the level for input channel 2 in the same way as you set it
for input channel 1 (see 3.3, "Setting the level").
3) Set
REC FUNCTION
You are now ready to record on track 2.
4) Rehearse your second spoken part by playing back the first
track (adjusting the level and pan if necessary) while
speaking the words for the second track.
5) Rewind and record when you are ready.
When you are recording, the meter of
levels of input 2. Since the signal is now going to track 2, the meter
for input 1 will not show anything.
6) Rewind and playback when you have recorded. Adjust the
level and pan position of the two tracks with the
controls for tracks 1 and 2.
PAN
Remember that the fader adjusts the level of what goes onto tape, not
the replay levels.
When you are playing back, the meter of
of the signal from the left outputs, and the meter of
show the input signal level as long as the
not SAFE .
7) Rewind and repeat the recording of track 2 until you are
satisfied with it.
input channel 2, and take both faders down to
SAFE
the controls of both inputs to
TRIM
MIC/LINE 1 / MONO
, the microphone signal is split
MIC/LINE 2
switch for to
INPUT 2
INPUT 2
INPUT 1
REC FUNCTION
LINE
, and
.
2
will show the input
and
LEVEL
will show the level
INPUT 2 will
switch is
. Set
0
.