Listening To Music On A Bluetooth Device - Sony SHAKE-X30 Operating Instructions Manual

Hide thumbs Also See for SHAKE-X30:
Table of Contents

Advertisement

To erase pairing information
Use the buttons on the unit to
perform this operation.
1
Press BLUETOOTH to select
BLUETOOTH function.
"BLUETOOTH" appears on the
display.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears on the display.
Press BLUETOOTH to disconnect the
BLUETOOTH device.
2
Hold down ENTER and LIGHT
MODE for about 3 seconds.
"BT HISTORY CLEAR" appears on the
display and all the pairing
information is erased.
Listening to music on a
BLUETOOTH device
You can operate a BLUETOOTH
device by connecting the system
and the BLUETOOTH device using
AVRCP.
Check the following before playing
music:
— The BLUETOOTH function of the
BLUETOOTH device is turned on.
— Pairing has been completed
(page 26).
Once the system and the
BLUETOOTH device are connected,
you can control playback by
pressing , , , / and
/.
1
Press BLUETOOTH on the unit to
select the BLUETOOTH function.
"BLUETOOTH" appears on the
display.
2
Establish connection with the
BLUETOOTH device.
Press BLUETOOTH on the unit to
connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH connection
from the BLUETOOTH device if the
device is not connected.
Once the connection is established,
the BLUETOOTH device name
appears on the display.
3
Press  to start playback.
Depending on the BLUETOOTH
device,
— you may need to press  twice.
— you may need to start playing an
audio source on the BLUETOOTH
device.
4
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first. If the
volume level is still too low, adjust
the volume level on the system.
Note
When the system is not connected to
• •
any BLUETOOTH device, the system
will connect to the last connected
BLUETOOTH device automatically when
you press BLUETOOTH or  on the
unit.
If you try to connect another
• •
BLUETOOTH device to the system, the
current connected BLUETOOTH device
will be disconnected.
To terminate the BLUETOOTH
connection
Press BLUETOOTH on the unit.
"BLUETOOTH" appears on the
display.
Depending on the BLUETOOTH
device, the BLUETOOTH connection
may be terminated automatically
when you stop playback.
27
US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shake-x10

Table of Contents