Table of Contents
Advertisement
A
R
+ SE
VER 1022G-URF User's Manual
9. From the Windows XP/Windows 2003 Setup screen, press the <Enter> key.
The XP/2003 Setup will automatically load all device files and then, continue
the Windows XP/Windows 2003 installation.
10. After the Windows XP/Windows 2003 OS Installation has completed, the
system will automatically reboot.
B-2 Installing the Windows OS for a Non-RAID System
11. Insert Microsoft's Windows XP/Windows 2003/Windows 2008/Windows Vista
Setup CD in the CD drive, and the system will start booting up from CD.
12. Continue with the OS installation. The Windows OS Setup screen will display.
13. From the Windows OS Setup screen, press the <Enter> key. The Windows
OS Setup will automatically load all device files and then continue with the
OS installation.
14. After the Windows OS Installation is complete, the system will automatically
reboot.
15. Insert the Supermicro Setup CD that came with your serverboard into the CD
drive during system boot, and the main screen will display.
B-2
Advertisement
Table of Contents
