Table of Contents
Advertisement
SY15F6584 - Back
SY15F6584 - Back
1
5
6
1. POWER SWITCH - This button controls power to the entire unit. Depress the side with the "I"
to turn power ON. Depress the other side to turn the unit OFF
2. RCA AUDIO INPUTS - Channel 1-8 Audio inputs (for cameras with standard RCA Audio output)
3. ALARM FUNCTION TERMINALS (INPUT/OUTPUT) - These terminals are used to connect
external alarm devices such as a motion sensor, door/alarm sensor, or time lapse VCR for Alarm
Recording.
4. ETHERNET PORT - Connects the monitor to a router for connection to the internet. Refer to
the Netviewer Instructions on Page 32 for Remote Connection.
5. AC INPUT - Connect the AC power using the power cord provided with the unit from the monitor
to an electrical outlet
6. BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras with BNC
connection type)
NOTE: When DIN type cameras are connected on a channel (as per input 7), the BNC
CONNECORS serve as LOOPING VIDEO OUTPUTS, and will send video to another device
(such as a DVR or SLAVE MONITOR).
16
2
7
3
8
9 10
4
Advertisement
Table of Contents
