LG VCARPETX Owner's Manual page 6

SAFETY PRECAUTIONS
CAUTION
Frequently empty the dust bin and
maintain its cleanliness.
The dust collected in the dust
bin can trigger allergies and may
contain harmful insects.
Use the Robot Cleaner indoors only.
Using it outdoors can cause product
failure and irreparable damage to
the unit.
Close the cover of the dust bin
on the main unit before starting
cleaning.
If the cover is not closed, it can
cause injury or product damage.
DO NOT use the Robot Cleaner
around a banister, staircase or any
other dangerous place.
Otherwise, the user or the product
can be exposed to damage.
In rare cases, the Robot Cleaner's
brush can damage the carpet. If
this happens, immediately stop the
cleaning operation.
When a carpet has long tassels, the
tassels can be damaged.
Do not let the main unit and
charging terminal of the home
station come into contact with
metallic objects.
Doing so can cause product failure.
Do not put water, detergent, etc.
into the Robot Cleaner.
Doing so can cause product failure.
Do not put any water or detergent
on the Robot Cleaner. If liquids get
inside of the Robot Cleaner, turn off
the power supply and contact an LG
Electronics sales agent or customer
care center.
4
Do not drop the Robot Cleaner or
subject it to strong impacts.
Doing so can cause injury or
product failure not covered by the
warranty.
Do not expose the Robot Cleaner to
cold temperatures (less than -5 °C)
for a long period of time.
Doing so can cause product failure.
Remove any cables or string from
the floor before starting.
Cable or string can get tangled in
the wheels of Robot Cleaner and
cause product failure or the cord of
an appliance can be disconnected.
Make sure the Robot Cleaner is
not put on a table or desk, with the
power ON.
It may result in injury of the user or
damage in the product.
Do not allow the Robot Cleaner to
sweep up liquids, blades, thumb
tacks, kindling, etc.
These items can cause product
failure.
Do not put sharp objects into the
opening of the Robot Cleaner's
ultrasonic sensor.
Doing so can cause product failure.
Do not use the Robot Cleaner when
the dust bin is completely filled up.
Doing so can cause product failure.