Entering BIOS setup
1
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press <F2>.
If you fail to press <F2> before POST is completed, you will need to
restart the server.
The Setup Main menu will be displayed showing the menu bar. Use
the left and right arrow keys to move between selections on the menu
bar.
BIOS setup primary menus
The tabs on the Setup menu bar correspond to the six primary BIOS Setup
menus, namely:
•
Main
•
Advanced
•
Security
•
Server
•
Boot
•
Exit
In the descriptive table following each of the menu screenshots, settings in
boldface are the default and suggested settings.
BIOS setup navigation keys
Use the following keys to move around the Setup Utility:
•
Left and Right arrow keys – Move between selections on the menu
bar.
•
Up and Down arrow keys – Move the cursor to the field you want.
•
PgUp and PgDn keys – Move the cursor to the previous and next
page of a multiple page menu.
•
Home – Move the cursor to the first page of a multiple page menu.
•
End – Move the cursor to the last page of a multiple page menu.
43