Installing An Expansion Card - Acer AT110 Series User Manual

38

Installing an expansion card

This section explains how to install an expansion card.
I/O interface
The AT110 has two PCI Express
• One PCI Express
• One PCI Express
• Two PCI (32-bit / 5 V) slots
To install an expansion card:
1 Perform the pre-installation instructions described on page 22.
2 Remove the side panel described on page 24.
3 If necessary, remove any cables that prevent access to the PCI slot.
4 Locate an empty expansion slot that is compatible with the
specification of the card you intend to install.
5 Install the expansion card.
®
and two PCI expansion slots:
®
x8 slot (x8 bandwidth)
®
x8 slot (x4 bandwidth)
3 System upgrades