Advertisement
ELECTRIC CABINET BASE CONVECTION STEAMER, MODELS ECX-2, ECX-10
4.0 PERIODIC MAINTENANCE (Continued)
CAUTION: Scald Hazard. Protect yourself. When flushing control,
hot water and steam will flow out of the drain.
CAUTION: Disconnect the power supply during cleaning or
servicing.
CLEANING
1. Keep exposed cleanable areas of unit clean at all times.
2. Thoroughly wash oven cavities, door liners, and pan racks at the end of each day or as
required with a mild detergent and water to prevent bacterial growth and odours.
3. Remove drain screens from inside compartment drains. Using a plastic bottle brush and
mild detergent, clean inside the drain opening ensuring there is no food residue or
blockage. Clean the drain screen and replace in its original position.
4. Wash gasket sealing surface with mild detergent to remove harmful food acids and rinse.
5. Water level control should be opened daily to blow down sediment and scalant.
6. Observe that the water in gauge glass is clean and clear. Extreme murkiness in water
indicates inadequate water quality.
7. Safety valve should be tripped during operation once a week to assure that it functions
properly.
8. Keep all exposed cleanable areas of unit clean at all times. DO NOT GET WATER IN
ELECTRICAL BOX OR ANY ELECTRICAL COMPONENTS.
CAUTION: Take extra caution when blowing down water level
control or tripping safety valve as extreme hot water and live steam
are present.
PART NUMBER 10058R2
INSTALLATION AND OPERATION MANUAL,
12
2008-11-12
Advertisement
