Advertisement
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this
manual for the life of the equipment:
Model #: ___________________________
Serial #: ___________________________
Date Purchased: ____________________
INSTALLATION & OPERATION
MANUAL
Electric Counter Tilting Skillet
ECTS-12
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read
the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
CROWN FOOD SERVICE EQUIPMENT
y
A Middleby Compan
70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9
Telephone: 919-762-1000
www.crownsteamgroup.com
Printed in Canada
MANUAL 10011R3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crown ECTS-12
Summary of Contents for Crown ECTS-12
- Page 1 Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. CROWN FOOD SERVICE EQUIPMENT A Middleby Compan 70 Oakdale Road, Downsview (Toronto) Ontario, Canada, M3N 1V9 Telephone: 919-762-1000 www.crownsteamgroup.com...
- Page 2 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This manual should be retained for future reference. This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
- Page 3 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 TABLE OF CONTENTS DESCRIPTION PAGE Important Notes for Installation and Operation ........2 Installation and Service Connections .
- Page 4 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 INSTALLATION AND SERVICE CONNECTIONS Part No. 10011R3 2013-01-14...
- Page 5 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 INSTALLATION 1.0 INSTALLATION INSTRUCTIONS Position appliance on counter allowing sufficient rear clearance from wall to tilt freely and completely without obstruction. Mark four corner locations of appliance base, as shown below.
- Page 6 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 2.0 OPERATING INSTRUCTIONS 1. Ensure that unit has been electrically connected and that circuit breakers are on. 2. Place power switch in “ON” position. 3. Set the thermostat dial to high (#10).
- Page 7 INSTALLATION & OPERATION MANUAL, ELECTRIC COUNTER TILTING SKILLET, ECTS-12 3.0 CLEANING INSTRUCTIONS NOTICE: As a safety precaution disconnect the power supply during cleaning and servicing. The Electric Counter Tilting Skillet should be cleaned after each use. Soak cooking surface with water and a mild soap to remove any food stuck to surface.
Need help?
Do you have a question about the ECTS-12 and is the answer not in the manual?
Questions and answers