Table of Contents
Advertisement
Installing and connecting the refrigerator
7.4
Installing the refrigerator
Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the outlet port (see chapter "Mounting the water drain outlet (optional)"
on page 13)
➤ Undo the transport lock (chapter "Releasing the lock" on page 22).
➤ Open the refrigerator drawer.
6
➤ Remove the blanking plugs (fig. 6).
➤ Push the refrigerator into the recess.
➤ Fix the refrigerator in place using suitable screws (fig. 6).
➤ Press the blanking plugs (fig. 6) into the openings.
7.5
Connecting the refrigerator to DC voltage
A
NOTICE! DANGER OF DAMAGE
• To avoid voltage drops and loss of performance, keep the
connection cable as short as possible and not be interrupted.
Therefore avoid additional switches, plugs or power strips.
• Disconnect the cooling device and other electric consumers from
the battery before you connect the battery to a quick charging
device. Overvoltage can damage the electronics of the device.
The refrigerator can be operated with a 12 V or a 24 V DC voltage supply.
14
2.
1.
3.
CRX
EN
Advertisement
Table of Contents
