Canon PIXMA G4210 Online Manual page 437

Changing the Printer Operation Mode (macOS)
If printing from a computer, delete jobs stuck in print queue.
Check4
• For Windows:
Deleting the Undesired Print Job
• For macOS:
Deleting the Undesired Print Job
Is your printer's printer driver selected when printing?
Check5
The printer will not print properly if you are using a printer driver for a different printer.
• For Windows:
Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box.
Note
• To make the printer the one selected by default, select Set as Default Printer.
• For macOS:
Make sure your printer's name is selected in Printer in the Print dialog.
Note
• To make the printer the one selected by default, select the printer for Default printer.
Check the size of print data. (Windows)
Check6
If the print data is large, part of image data may be cut off and printing failure may occur.
Click Print Options on Page Setup sheet of the printer driver. Then set Prevention of Print Data Loss to On in
the dialog that appears.
Important
• Selecting On for Prevention of Print Data Loss may reduce print quality.
If printing from a computer, restart the computer.
Check7
Restart the computer and try printing again.
437