Table of Contents
Advertisement
If you select SSID and press the OK button, you can check the updated identifier (SSID).
Change password
• Manual setup
1. Select Manual setup and then press the OK button.
2. Enter new password and then press the OK button.
• Auto setup
1. Select Auto setup and then press the OK button.
2. Select Yes and then press the OK button.
3. Select Done and then press the OK button.
If you select Security protocol instead of Done, you can check the updated password.
Confirm request
To display the confirmation screen when a Wi-Fi Direct compatible device is connecting to the
printer, select Yes and press the OK button.
Important
• To prevent an unauthorized access, we recommend you should not change the setting from
the default.
Note
• If you change the Wireless Direct setting of the printer, also change the wireless router setting of the
device.
Changing Printer Setting to Use Wireless LAN
Follow the procedure below to change the printer setting to use wireless LAN.
1.
Make sure that printer is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Select Device settings and then press the OK button.
4. Select LAN settings and then press the OK button.
5. Select Wireless LAN and then press the OK button.
6. Select WLAN activ./inactiv. and then press the OK button.
7. Select Active and then press the OK button.
262
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
