Page 1
在 Windows 以無線方式安裝及連接 PIXMA G4770 打印機 Installing PIXMA G4770 on Windows via WiFi connection 無線設定 Wireless Setup 確保在開始無線連接設定之前,印表機已開啟。 如果電源開啟,電源指示燈閃爍,然後持續亮起。 Make sure printer is turned on before starting wireless connection setup. If the power is on, the ON lamp flashes and then remains lit.
Page 2
選擇 LAN 設定並按 OK 按鈕。 Select LAN settings and press the OK button. 選擇 Wi-Fi 並按 OK 按鈕。 Select Wi-Fi and press the OK button. 選擇 Wi-Fi 設定並按 OK 按鈕。 Select Wi-Fi setup and press the OK button. 選擇手動連接並按 OK 按鈕。 Select Manual connect and press the OK button.
Page 3
選擇無線路由器並按 OK 按鈕。 Select your wireless router and press the OK button. 如果未找到您的路由器,請確定您的路由器設定符合以下打印機的規格: If you do not find your router, please ensure your router setting meets the below printer requirement: a. 頻率 Frequency: 2.4GHZ b. 頻道 Channel: 1-11 (其中一條 either one) 如果顯示以下螢幕,請按...
Page 4
顯示以下螢幕時,請按 OK 按鈕。 When the following screen appears, press the OK button. 按 (主頁)。 Press (HOME). 網路連接設定完成。 The network connection setup is now complete. 連接完成後, 會出現在螢幕左上方。 Once connection is complete, appears at the upper left of the screen.
Page 5
下載及安裝步驟 Driver download and Installation procedure 到以下佳能網站並下載印表機的驅動程式 Go to below Canon webpage and download the printer driver https://hk.canon/en/support/pixma%20g4770/model 選擇並下載以下檔案 Choose and download below file G4770 series MP Driver Ver.x.xx (Windows) 按上面網頁內的[Download] ,下載完成後開啟該檔案安裝 Click [Download] in the webpage above, and then execute the file after download was completed 按[下一步]...