Canon PIXMA G4210 Online Manual page 142

Select Scan contrast, press the OK button (D).
Use the button (C) to change the contrast, then press the OK button (D).
Network Status Indication
Wireless LAN setting and the network status indicate by the icon.
icon is displayed on the LCD after pressing each mode button, Wireless LAN is enabled and the
printer is connected to the wireless router.
Depending on the signal state, the icon will change.
(Signal strength: 81 % or more)
(Signal strength: 51 % or more)
(Signal strength: 50 % or less)
Note
• When Wireless LAN is disabled,
You can use the printer over a wireless LAN without any problems.
The problem such as the printer cannot print may occur according to the net-
work status. We recommend placing the printer near the wireless router.
The problem such as the printer cannot print may occur. Place the printer near
the wireless router.
Wireless LAN is enabled but the printer is not connected to the wireless router.
icon is not displayed.
142