Printing/Scanning with Wireless Direct
You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.
• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using Wireless Direct)
This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the
printer directly.
Follow the procedure below to use Wireless Direct.
1. Preparing the printer.
Changing Printer Setting to Use Wireless Direct
2. Preparing a device to connect to the printer.
Changing Settings of a Device and Connecting It to the Printer
3. Printing/Scanning.
Printing/Scanning with Wireless Direct
Important
• You can connect up to 5 devices to the printer at the same time.
• Check the usage restrictions and switch the printer to the Wireless Direct.
Restrictions
Note
• For details on how to change the printer setting to wireless LAN connection, refer to the following.
Changing Printer Setting to Use Wireless LAN
Changing Printer Setting to Use Wireless Direct
1.
Make sure that printer is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Select Device settings and then press the OK button.
4. Select LAN settings and then press the OK button.
5. Select Wireless Direct and then press the OK button.
6. Select Switch WL Direct and then press the OK button.
7. Select Yes and then press the OK button.
259