Canon PIXMA G4210 Online Manual page 153

4. Apply the settings
Click OK. When the confirmation message appears, click OK.
The setting is enabled after this. When you want to disable this function, select Disable from the list
according to the same procedure.
Note
• When the printer is turned off, the Canon IJ Status Monitor message varies depending on the Auto
Power On setting.
When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable,
"Printer is offline" is displayed.
Important
• When you use the printer by connecting it to a telephone line via a modular cable, you can set Auto
Power Off but the power will not be turned off automatically.
153