Philips Easy Clean FC8738 Manual page 9

2 To disconnect the handgrip from the tube, hold the handgrip with
one hand. With the other hand, hold the telescopic tube and press
the tube release button (1) and pull the tube off the handgrip (2).
attaching the standard handgrip (specific types only)
1 To connect the telescopic tube to the handgrip, press the spring-
loaded lock button on the handgrip (1) and insert the handgrip into
the tube (2). Fit the spring-loaded lock button into the opening in the
tube ('click').
2 To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.
Note: This vacuum cleaner has been fitted with holes (specific types only) at
the end of the handgrip. These holes may prevent objects from getting stuck or
damaged when you use your vacuum cleaner without the tube or accessories
supplied.
hose
1 To connect the hose, insert the hose fastening hook into the opening
(1) and then push the hose connector downwards ('click') (2).
2 To disconnect the hose, press the release buttons (1) and pull the
hose connector out of the hose connection opening (2).
English
9