Related Manuals for Smeg WHT72PEIT
Summary of Contents for Smeg WHT72PEIT
- Page 1 WHT72PEIT Lavatrice Manuale utente Washing Machine User’s Manual Numero del documento 2820526530_IT/ 19-11-18.(11:55)
-
Page 2: General Safety Instructions
1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur. -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •... -
Page 4: Important Instructions For Environment
2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician. -
Page 5: Technical Specifications
4 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark SMEG Model name WHT72PEIT Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0,737 Energy consumption of the standard 60°C cotton programme at partial load (kWh) -
Page 6: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's... -
Page 7: Connecting The Drain Hose To The Drain
(less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. • To prevent the waste water to go back into the machine again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. -
Page 8: Electrical Connection
4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall * Sort laundry according to type of fabric, not be liable for any damages that will arise color, and degree of soiling and allowable when the product is used without grounding in water temperature. -
Page 9: Things To Be Done For Energy Saving
4.2.3 Things to be done 4.2.6 Using detergent and softener for energy saving INFORMATION Following information will help you use the product in an ecological and energy-efficient manner. • When using detergent, softener, starch, fabric • Operate the product in the highest dye, bleacher and decolorant, descaling capacity allowed by the programme you agents;... - Page 10 • If you will use powder detergent, the CAUTION! apparatus must be secured at top position. • Use only detergents manufactured If the product does not contain a liquid specifically for washing machines. detergent cup: • Do not use soap powder. •...
-
Page 11: Tips For Efficient Washing
• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment. -
Page 12: Operating The Product
4.3 Operating the product 4 - Duration information display 5 - Child lock enabled light 4.3.1 Control panel 6 - End Time Setting button 4 5 6 7 8 7 - Door lock enabled light 8 - Programme Follow-up indicator lights Lingerie Cotone 9 - On / Off button... -
Page 13: Programme Selection
2. Select the desired programme with the ** “Cotton Economic 40°C" and Programme Selection knob. "Cotton Economic 60°C" are standard programmes. These programmes are known as "40°C cotton standard programme" and "60°C cotton standard programme" and indicated with the symbols on the panel. 4.3.4 Programmes INFORMATION •... - Page 14 • Scarico+Centrifuga (Spin+Drain) “The wool wash cycle of this You can use this function to remove the water machine has been approved on the garment of drain the water in the by The Woolmark Company machine. for the washing of machine washable wool products •...
-
Page 15: Temperature Selection
• Lingerie Sweat Machine Oil You can use this programme to wash delicate Collar Soil Baby Food garments that are suitable for hand wash and delicate women's underwear. Small amount of • Select the stain programme. garments must be washed in a washing net. •... - Page 16 the display. When "No Spin" is selected, the running programme after the washing cycle rinse level indicator lights will not turn on. starts. If you wash cycle has reached a point where no auxiliary function can be selected, the light of the relevant auxiliary function will INFORMATION flash.
- Page 17 4.3.7.2 Functions/Programs selected • Anti Piega (Anti-Crease+) by pressing the key for 3” This function is selected when the 3rd auxiliary function is pressed and held for 3 seconds • Drum Cleaning and the programme follow-up light for the Press and hold the 1st auxiliary function key for relevant step turns on.
- Page 18 to be opened. When the loading door is ready INFORMATION to be opened Loading Door light will turn off, programme step light will continue to flash. • You must press Start/Pause and wait Changing the auxiliary function, speed and for the door to open to add laundry temperature into the machine during the End Time Depending on the step the programme has...
-
Page 19: Maintenance And Cleaning
4.4 Maintenance and cleaning 4.3.13 End of programme The "Complete" light (LED) will turn on when Service life of product extends and frequently the programme is over. experienced problems will be reduced if it is If you do not press any button for 10 minutes, cleaned at regular intervals. -
Page 20: Cleaning The Body And Control Panel
4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause solid items such as buttons, coins and fabric rust stains in the drum. Clean the fibers clogging the pump impeller during stains on the drum surface by using discharge of washing water. -
Page 21: Troubleshooting
5 Troubleshooting 3 Follow the below procedures in order to drain water. Program does not start after closing the door. The product has an emergency water draining • Start / Pause / Cancel button was not pressed. >>> *Press hose, in order to drain the water: the Start / Pause / Cancel button. - Page 22 Loading door cannot be opened. • Excessive foam might have occurred and automatic foam absorption system might have been activated due to too • Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or much detergent usage.
- Page 23 It does not rinse well. Too much foam forms in the machine. (**) • The amount, brand and storage conditions of the detergent • Improper detergents for the washing machine are being used are inappropriate. >>> Use a detergent appropriate used.