Philips Sonicare FlexCare Platinum HX9112/13 Manual page 12

ENGLISH
12
2 Press and hold the power on/off button and the mode button for
2 seconds.
You hear 1 beep to indicate that the Pressure Sensor has been
,
deactivated.
You hear 2 beeps to indicate that the Pressure Sensor has been
,
activated.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth. Depending on
the brushing mode you have selected, the Quadpacer beeps at
different intervals during the brushing cycle. The Quadpacer works in
all 3 modes and at all 3 intensity levels (Fig. 10).
The Quadpacer feature on this type has been activated. To deactivate or
reactivate the Quadpacer feature:
1 Place the handle with a brush head attached on the plugged-in
charger or sanitiser.
2 Press and hold the mode button for 2 seconds.
You hear 1 beep to indicate the Quadpacer has been deactivated.
,
You hear 2 beeps to indicate the Quadpacer has been activated.
,
Smartimer
The Smartimer indicates that your brushing cycle is complete when
it automatically switches off the toothbrush at the end of the brushing
cycle. Dental professionals recommend brushing at least 2 minutes twice
a day.
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to ease into the Sonicare experience. The Easy-start feature only works in
the Clean mode and at the High intensity level.
This Sonicare type comes with the Easy-start feature deactivated.
To activate or deactivate the Easy-start feature:
1 Attach your brush head to the handle.