Functions In The Video Camera Mode - Sharp 703SHf User Manual

Selecting the Shutter Sound
→
"Camera" [Options]
1.
Select the desired shutter sound from 3 preset patterns.
Note
• Continuous Shoot uses the specialised shutter sound that cannot
be changed from the above settings.
• The shutter sound remains active even when "General Volume"
(p. 84) is set to "Silent" to prevent unauthorised use.

Functions in the Video Camera Mode

Selecting the Recording Time and Size
→
"Camera" [Options]
1.
Select "For Message" or "Extended Video".
"For Message":
"Extended Video":
2.
Select "Large(QCIF)" or "Small(SubQCIF)" picture size for "For
Message" and "QVGA(3gp)", "QVGA(asf)", "Large(QCIF)" or
"Small(SubQCIF)" picture size for "Extended Video".
Note
• If you select "For Message" for the recording time, the file size is
limited depending on the service provider.
• "Save and Send" is not displayed after recording in the Extended
Video mode.
42 Camera
→ →
"Settings" "Shutter Sound"
→
"Record Time/Size"
Limits the size to send a message
depending on service providers.
Less than 30 minutes (depending on
the memory)
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to be
activated.
→ →
"Camera" [Options]
1.
Select "On" or "Off".
Note
• The microphone is already turned on in the default setting. Select
"Off" to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
→ →
"Camera" [Options]
1.
Select the appropriate format.
→
"Settings" "Microphone"
→
"Settings" "Video Encode"