Table of Contents
Advertisement
S-Video Hook Up
Connect an external S-Video device to the TV
1
Locate the S-Video out jack on the back of the
VCR or other S-Video device.
2
Connect the S-Video cable from the device to the
TV S-Video In jack, according to the diagram to
the right. As required, make the other audio con-
nections as shown to the right.
3
Remove the back of the remote, put in
two AA batteries.
4
Plug in the TV. The TV is designed to operate on
standard current, 120-volt 60 Hertz AC. Do not
attempt to operate it on DC power.
120 V AC
60 Hz
5
Go to page 12 to Auto Program the TV.
No S-Video cable or audio cables are provided with the TV. Since
S-Video is for Video only, you must connect audio cables or there
will be no sound for the S-Video source.
P A G E 1 0
Back of
Remote
S-Video Device
S-Video
Audio Out
S-Video Out
Device
R L
Connections
Panel
S-Video cable
not included
with TV
TV Back
Antenna
Cable
M.P.I.
Matrix
Out
Video
R- Audio - L
In
In
S-Video
R- Audio - L
In
In
Advertisement
Table of Contents
