Package Contents • U338-000 USB 3.0 to SATA / IDE Adapter • USB 3.0 Cable – 2.5 ft. • 4-Pin Molex Power Cable • External Power Supply (Input: 100-240V, 50/60Hz, 0.8A Output: 12V, 2A) • Owner’s Manual • Backup Software CD Features •...
1. Connect the U338-000 to your computer using the included USB 3.0 cable. 2. Connect the external power supply to the U338-000 and plug it into an appropriate power source. Turn on the power to the U338-000.
AI-OTB One Touch Backup Software Installation 1. Insert the software CD into your computer and navigate to the AI-OTB.exe file in the CD folder. Select the file, and the AI-OTB Setup Wizard will appear. 2. Click the Next button to advance to the next screen in the Setup Wizard. Follow the prompts until you reach the Ready to Install screen.
AI-OTB One Touch Backup utility. See the Config and OTB Path sections in this manual for details. Simply connect your hard drive via the USB port on your computer, and press the backup button on your U338-000 adapter. The backup will take place according to the settings you have entered.
AI-OTB One Touch Backup Software Status When the AI-OTB interface opens, the Status screen is the first screen that appears. Use the drop-down menu in the upper-right corner of your computer screen to select a drive and display its information. If a drive is not selected, the Config, OTB Path, and Restore tabs will be grayed out and inaccessible.
AI-OTB One Touch Backup Software Config The Config tab is where you assign an Original PC to the selected drive and determine how the backup data is stored on it. To set the Original PC, check the corresponding box, and then select how you want the backup data to appear in the drive. Click the Save button to save these settings.
To back up your data, press the One Touch Backup button on the U338-000, or click the orange backup icon in the lower- left corner of the AI-OTB interface. Since the backup icon appears on every tab in the interface, you can back up data from any tab.
AI-OTB One Touch Backup Software Restore The Restore tab is where you restore backed-up data to your computer in the event of a crash. You can restore data from the drive that was set up in the OTB Path tab, or you can select another location using the Custom Path option in the Restore tab.
• Check OTB Status – Select this box to allow the One Touch Backup button on the U338-000 to be used to initiate a backup. This option is enabled by default. • Show AI-OTB Backup Directory In External Disk – Select this box to make the backup data visible to users who access the backup drive.
1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Page 12
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) •...