Step Of Using The Pentouch Program; System Requirements; Installing The Pentouch Program - LG 50PZ850T Owner's Manual

charging port and PC.
Do not handle the touch pen with excessive
y
force. If you use the touch pen with excessive
force, you may leave foreign substances
on the screen. Clean the product with the
product cleaning cloth provided.
When multiple people use the touch pen,
y
make sure that sufficient space is available.
Collisions can cause injury or failures.
Step of using the Pentouch
program
Follow the steps below to use the Pentouch func-
tion.
1
Check the system requirements before
installation.
2
Install the Pentouch program and the USB
dongle driver from the installation CD.
3
Pair the pen and the dongle.
4
Connect the PC and the TV.
5
Configure the PC screen.
6
Activate the Pentouch mode on the TV.
7
Start the Pentouch program.

System Requirements

Make sure that the drivers are installed properly to
allow proper operation of the touch pen.
Windows 7 Starter Edition is not supported.
y
Supported Operating System
Windows XP 32 bit
Windows Vista 32 bit
Windows 7
64 bit
Recommended System Requirements for
Pentouch
CPU: Dual-Core 2GHz or better
y
Memory: 1GB or more
y
HDD: 500MB or more
y
Display: Graphics card with 1920x1080
y
(Except for 50PT49**), 1024x768 HD(Only
50PT49**)via an RGB or HDMI output port
Windows 7 is recommend due to its support
y
of multi-touch.
NOTE
You must log in as an administrator to
y
install or remove the included software.
Make sure to install the drivers found on
y
the CD provided.
You can also download this program
y
from the LG Electronics website.
Make sure to close all running
y
applications before installing the drivers.

Installing the Pentouch Program

Install the Pentouch program on your computer to
use its various functions.
Follow the steps described in this manual to install
the program.
1
Prepare your computer and start it.
2
After the computer starts, Insert the supplied
CD . The installation screen appears
automatically.
(If the installation screen is not displayed
automatically, access My computer and then
click LG and index.htm to view the installation
screen.)
3
Click [ Install the Pentouch Program] on the
web page. Selects a language to display, and
then Install the Pentouch program.
The default folder is used for installation.
A window appears to indicate that the installa-
tion was completed successfully.
4
Install the USB dongle driver after installing
the Pentouch program.
37
PENTOUCH