Table of Contents
Advertisement
38
PENTOUCH
Using the Touch Pen with a PC
The Touch Pen acts as a mouse when using Microsoft Windows.
The Touch Home button on the Touch Pen works in the same way as the right-click function on a mouse.
Recommended Computer Specifications
CPU: Dual-Core 2 GHz or better
Memory: 1 GB or more (2 GB or more is recommended.)
HDD: 500 MB or more
Display: Graphics card with 1024 x 768 for 50PH470H,
1920 x 1080 for 60PH670H models via an RGB or HDMI output port.
* A Windows 7 OS that supports multi touch function is recommended.
NOTE
y
y
You must log in as an administrator to install or remove the program.
y
y
Ensure no applications are running before installing the Pentouch program.
y
y
Ensure the existing installation program is removed before installing the updated version.
Installing the Pentouch Program
1
Insert the enclosed installation CD into the PC and install the program.
2
Check the Language settings and its progress during the installation process.
Restart your computer after the installation.
3
Insert the dongle into the USB port of the PC.
The dongle detects the device driver and automatically installs the driver.
4
Check if the indicator LED on the dongle turns red, and then power on the Touch Pen within 10 cm from the
dongle. If the indicator LED on the Touch Pen turns green, it means that the Touch Pen is ready for use.
5
Connect PC and TV with RGB or HDMI cable.
NOTE
y
y
The dongle will not be detected if the Pentouch program is not installed.
y
y
If the device pairing fails, insert the dongle into another USB port and check whether it is recognized.
Supported Operating System
Windows XP
32 bit
Windows Vista
32 bit
Windows 7
64 bit
Windows 7 Starter Edition and Home
Basic Edition are not supported.
Advertisement
Table of Contents
