Step Of Using The Pentouch Program; System Requirements; Installing The Pentouch Program - LG PA45** Owner's Manual

When multiple people use the touch pen and
y
cradle, make sure that sufficient space is
available. Collisions can cause injury or failures.
Step of using the Pentouch
program
Follow the steps below to use the Pentouch func-
tion.
1
Check the system requirements before
installation.
2
Install the Pentouch program
installation CD.
3
Pair the pen and the dongle.
4
Connect the PC and the TV.
5
Configure the PC screen.
6
Activate the Pentouch mode on the TV.
7
Start the Pentouch program.

System Requirements

Make sure that the drivers are installed properly to
allow proper operation of the touch pen.
Windows 7 Starter Edition is not supported.
y
Supported Operating System
Windows XP 32 bit
Windows Vista 32 bit
Windows 7
64 bit
Pentouch
from the
Installing the Pentouch
Follow the steps described in this manual to install
the program.
1
2
3
4
5
Recommended System Requirements for
CPU: Dual-Core 2GHz or better
y
Memory: 1GB or more
y
HDD: 500MB or more
y
Display: Graphics card with 1024x768 via an
y
RGB or HDMI output port
Windows 7 is recommend due to its support
y
of multi-touch.
NOTE
You must log in as an administrator to
y
install or remove the included software.
Make sure to install the drivers found on
y
the CD provided.
You can also download this program
y
from the LG Electronics website.
Make sure to close all running
y
applications before installing the drivers.
Remove old version of the Pentouch
y
program installed on your PC before re-
installing or installing new version.
Prepare your computer and start it.
After the computer starts, insert the CD
provided. The installation screen appears
automatically.
(If the installation screen is not displayed
automatically, access My computer and then
click LG and index.htm to view the installation
screen.)
Click [Install the Pentouch Program] in the
installation window.
The default folder is used for installation.
A window appears to indicate that the installa-
tion was completed successfully.
In Windows XP, the [Found New Hardware
Wizard] installs your driver automatically.
Restart your computer after the installation.
NOTE
Disconnect the USB dongle first to install
y
the program.
39
PENTOUCH
Program