LG 50PZ850T Owner's Manual page 74

74
CUSTOMIZING SETTINGS
Advanced image options
Setting
Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker.
Dynamic Colour Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid.
Noise Reduction Reduces screen noise without compromising video quality.
Gamma You can adjust brightness of dark area and middle gray level area of the picture.
»
»
»
Black Level Sets black level of the screen to proper level. This function is available in the following modes:
AV (NTSC-M), HDMI, Component or USB
»
»
»
Film Mode
Makes video clips recorded in film look more natural by eliminating judder effect.
DVD and Blu-ray movies are filmed at 24 frames per second (fps).
Colour Gamut Maximizess the utilization of colour to increase colour quality.
»
»
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
XVYCC *This feature is not available for all models.
(available in Cinema This is the function to express richer colours.
and Expert modes) This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture Mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
Expert Pattern This is the pattern necessary for expert adjustment.
(available in Expert This function is enabled in "Picture Mode - Expert" when you watch DTV.
mode)
Colour Filter
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Low: Make the dark and middle gray level areas brighter.
Medium: Express the original picture level.
High: Make the dark and middle gray level area darker.
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Auto : Sets black level of the screen to High or Low automatically according to the input
signal level.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Description